- Place of Origin: Hong Kong
- Brand Name: SURECOM
- Model Number: SA-250
- Frequency Range:: 132-173Mhz / 200-260Mhz / 400-519MHz
- Connector: SMA (50 oHM)
- Color: black
- RF Output Power: 1-1.5V(5 - 10dB)
- Frequency Step: 0.1/1/10/100/1000KHz
- VSWR Range: 1.00-19.99
- ZRX Range: 0-99.9
- Build-in Battery: 3.7V 900mah ,Li-ion 14500
- Charge Power Supply: DC5V> 500mA
- Type: SWR Antenna Analyzer
Packaging & Delivery
|Packaging Details:||1x SURECOM SA250 132-173 / 200-260 / 400-519MHz Colour Graphic Antenna Analyzer|
|Delivery Detail:||1 days to 30days|
SURECOM SA250 sa-250 VHF & UHF portable Colour Graphic Antenna Analyzer
SURECOM-HK are powerful antenna analyzers designed for testing, checking, tuning or repairing antennas and antenna feed lines.
Mainly, these are S.W.R. (Standing Wave Ratio) and impedance measurement instruments (vector impedance analyzers).
Easy-to use measurement modes, as well as additional features such as connection to a personal computer (to plot Smith charts, etc.), make SURECOM attractive for professionals and hobbyists. It is quite important that graphical display of various parameters over a wide frequency range is a key feature of these analyzers which significantly reduces the time required to adjust an antenna.
- 2.2 ” precision LCD screen,High-lumen LCD brightness, easy to read in direct sunlight
- Heavy duty Aluminum enclosure,strong anti-interference ability.
- Very compact and convenient for field use
- Built-in rechargertable battery
- Full Band control by knob ( 132-173Mhz / 200-260Mhz / 400-519MHz)
- Easy setup, only four control buttons with convenient on-screen soft menus
- Constant Battery Status Indicator and Auto Shut-off
- Built-in timer shows elapsed time when unit is turned on
- High efficiency IC, low power consumption, the longest working hours
- More choice measurement frequency Span .
- One botton quick scan mode (V1,V2,U) or 3 band by full screen.
- Auto marker the low s.w.r. level reference
|Frequency Range:||132-173Mhz / 200-260Mhz / 400-519MHz|
|Connector:||SMA-Female (50 OHM)|
|RF Output Power:||1-1.5V(5 - 10dB)|
|Build-in Battery :||3.7V 900mah ,Li-ion 14500|
|Voltage input :||DC5V> 500mA|
|Charger indicator:|| Two-color LED Hidden (when not charging) there are three instructions state: |
1, charging (red) ;
2, charging is completed (green)
3, Battery fault (flashing)
|Charger Plug:||Standard Micro USB connector|
|Size:||70 x 120 x 25 mm|
|Colour Display:||TFT LCD 320 x 240 pixels|
Power Source: Built-in 3.7V, 900-mAh ,Size 14500 of Lithium battery.
Charge Controller: Smart charger, LED charging-status indicator
Voltage Monitor: On-screen DVM, plus battery condition icon
Charger Source: Any USB port, analyzer accepts Micro-USB plug
Power Savers: Auto-off timer, Auto Run/Stop RFgenerator controlInterface
RF Connector: SMA-female , (optional PL-259 ,N connector need adapter)
Battery Charge Connector: Micro-USB
Screen: 2.2 inch high-output color TFT
Function Keys : 4 botton, with on-screen (soft-menu) identifiers
Tuning: Rotary encoder with press-in tuning-step selection
Weight and Dimensions
Case: Aluminum metal
Size: 2.8" wide x 4.0" high x 1.0" deep (7 cm x12cm x 2.5 cm)
Weight: 6.1 oz (0.172 kg)
1.0 Turn on and Turn off the power
Turn on the power, Press and hold White botton when the dot disappear from left up angle ,. top Menu appeared on the screen.
Turn off the power, You have 2 method :
a) On Top Menu page ,Press and hold the White [F1 ] botton 5 second .
b) On Top Menu page , Rotary encoder on "Power off", Press the [F2 Enter]
1.1Function Select (Please see Pic.1)
You can turn the knob select you want function and press [F2.Enter] botton .
2.0 ANTENNA TEST EXAMPLES (Scan mode): (Please see Pic.2)
In the Top Menu screen: Rotary encoder on "Scan", Press the [F2 Scan] to frequency mode measurement button, enter Scan (scan mode) screen.
Press [F.2 scan ],button to start the scan operation. During scanning, in order to ensure measurement accuracy, each frequency will stay for short while.
one scanning cycle will take about 1-2 seconds. Once SCAN is done, it will enter ”Present” mode (result) screen
You have results on the screen : Show the SWR curve only (because default setting SWR curve only , Zx curve, Rs curve, jx curve Disable)
You can Enable other curve on the screen: On Top Menu page, Rotary encoder on "Zx", Press the [F2 Enter] to enable . (Please see Pic.1)
Other cure will Disable when Power Off , If want enable in the future, Rotary encoder on "Save", Press the [F2 Enter] to save setting .(Please see Pic.1)
2.1 Move the curso marker: (Please see Pic.3)
View the scan frequency point on the curve on each scan of the specific parameters of the measurement results.
Press the [F3.View ] button to start the view operation mode. rotary encoder ,the white triangle curve marker is move
Dot scale will display on screen, Press bottom change the Dot scale,You have 3 options of Dot scale mode for choose, [Dot =x1][Dot =x10][Dot= x25] .
SWR Full scale will display on screen,Press bottom change the graphically plot SWR,You have 3 options scale mode for choose, [SWR=x2 ][SWR= x 0.5][SWR=x1] .
2.2 Quick 1 start Scan mode: (Please see Pic.4)
Quick view the scan frequency point on the curve on each scan
Press the button [Quick 1 ] to start the Quick 1 operation mode .You have 3 options scan mode for choose .
Press the button [F1 Scan V1 ] . 132 to 174 MHZ can of the specific parameters of the measurement results.
Press the button [F1 Scan V2 ]. 200 to 260 MHZ can of the specific parameters of the measurement results.
Press the button [F1 Scan U ] . 400 to 519 MHZ can of the specific parameters of the measurement results.
2.3 Quick 2 start Scan mode: (Please see Pic.5)
Quick view the Full band scan frequency point on the curve on each scan
Press the [Q2 ] button to start the Quick 2 operation scan mode.
Press the [ScanFull ] button to start the 3 BAND (132-174,200-260,400-519MHz )Scan operation mode. the measurement results. after you have 2 options
mode for choose .
Press the [Scan2 Mk ] button to read the best SWR Yellow triangle curve marker .( operation Span 108MHz)
Press the [MoveCur ] button ,Nearby the best SWR Yellow triangle curve marker, Move right hand side .Press again move left hand side.
3.0 ANTENNA TEST EXAMPLES (Single mode): (Please see Pic.7)
In the Top Menu screen: Rotary encoder on "Single", Press botton "F2" single frequency mode measurement button, enter single (single scan mode) screen.
a, Rotary encoder potentiometer enter the center frequency, the specific reference to the above operation "SCAN" sweep measurement mode descriptions.
b, Press the ”F2 scan", to start the scan for one time .
Single frequency mode provides a single frequency impedance measurement, the measured frequency of the basic parameters are displayed on the screen. And
to indicate the form of bars and numbers displayed on the screen quickly.
The scanning one time , will stop, until you press the F2 Scan button or rotary encoder potentiometer enter the center frequency.
In this mode, it can be used as an accurate signal generator, please refer to RF out.
1 x SA-250
1 x User"s Manual
1 x Mirco Usb Charger Cable
1 x AC Adapter 100-240V (Depends on your country)
409 SHOP LTD is a manufacturing department of a professional enterprise providing two-way radio accessories. For years, we have been committed to developing products according to domestic and overseas markets' demands. Our full range of products include earphones, headsets, speakers, microphones, throat microphones, air acoustic w/mic, leather cases, batteries, chargers, programming cables, antennas and other fittings compatible with major brands of two-way radios.
We also provide customized solutions for customers depending on their requirements. Our products have been exported to Europe, America and Southeast Asia, enjoying high popularity.
We always persist in new and unique development and strictly follow the quality standard. Our materials are selected through selection process. As a leading department with innovative technology, we are proud of offering good quality products, low prices and better selections, as well as prompt and reliable services to our customers.
Q: What's your company MOQ?
A: In generally, if use customer brand, we will ask at least 500pcs, this we can negotiate.
|Q: What's your delivery time?|
A: This please ask our stock in first, products can send out once receive your deposit.
If use customer brands, we will take a 20-25days to prepare materials and mass production.
|Q: Can your company accept customize?|
|A: Welcome OEM & ODM.|
|Q: How do you solve after sale service?|
A: This please ask us for technical support if you have workers know how to repair.
If do not have engineers, please send back the items, we can repair the items for you.
|Q: Can you send a sample for us to develop?|
|A: Yes, we can. Sample can send out once you ask for it, but will ask a sample fee. Sample fee will return back in future order.|